導熱油爐是基于強制循環的設計思維而開發的直流式特種鍋爐。

封閉循環供熱，通過膨脹油槽與大氣相通，液體輸送熱能，熱損失少，節能效果顯著，環保效果好。

本體采用煙氣三回程盤管設計，這種直流式結構，決定了傳統鍋爐所不具有的安全性。

由于采用盤管設計，因此，受熱面充足，使其有較高的熱效率。

導熱油鍋爐，顯著的特點是逆流換熱，燃燒排煙溫度與熱導油出口溫差在30%左右。

導熱油鍋爐具有卓越的性能結構、簡潔的結構，主要是在較低的壓力下運行，獲取450C左右的工作溫度，具有低壓高溫特點。

使用導熱油作為熱載體的油、氣的熱載體鍋爐，系統應配備膨脹槽，儲油罐、安全組件、測量儀表和控制裝置，循環油泵應一用一備并與燃燒機互為為連鎖。

為確保導熱油的正常使用壽命和導熱效果，嚴禁超溫使用。 

Heating conducting oil boiler is a direct special boilerbased on circulation compulsion design ideas.

Closed circulation heating connected to the atmospherecan prolong the life of the boiler. Liquid phase transportationof heat minimizes the loss the heat. The result of energysave is significant and the protection of the environment isgreat.

The body uses three -loop piping design. This is a directcirculation structure The design decides the safety notpossessed by traditional boiler.

Due to the piping design the heating surface is abundantith high efficiency in heatinga obvious characteristic of heat conducting oil boiler isreverse heat circulation. The difference of temperaturesbetween combustion exhaustion and heat conducting oil isbelow 30C.

The excellence of the structure of the heat conducting oilboiler to operate under low pressure to obtain workingtemperature below 450C. These is its characteristics of lowpressure and high-temperature.